Otomatik Fren Disk Balans Makinesi Model XH-DLX30

Equipment Description
It is applicable for single-face balance measurement and correction (by drilling and milling) of disc workpieces (e.g. flywheels, pulleys, brake drums, gears, clutches, flanges, planet carrier, differential housings, brake discs, water pump impellers and tugging wheels.)

Product Parameters
Serial No.	Item Details	Parameter Range
1	Equipment model	DLX30
2	Equipment external dimension	1650X1240X1920mm
3	Maximum mass of workpiece (Kg)	35kg(including fixture)
4	Workpiece outer diameter	φ180~φ450mm
5	Workpiece height	≤200mm
6	Three-jaw clamping diameter	φ180~φ450mm
7	Workpiece max diameter (without balance correction)	≤400mm
8	Drilling/milling depth	≤10mm
9	Drill bit diameter	φ6~φ14mm
10	Balance test speed range	≤2400rpm（adjustable）
11	Unbalance Reduction Ratio	≥90%
12	Minimum attainable residual unbalance	≤1g.mm/kg
13	Balance motor power	2KW(servo motor）
14	Balance measurement time	8-15 s
15	Cycle time (when unbalance value≤3g)	≤50S (Circular milling)
15	Cycle time (when unbalance value≤3g)	≤60S (Circular drilling)
16	Protection	Phase order protection, overloading protection, air pressure monitoring

Brake Disc Automatic Balancing Machine
1. Equipment Description It is applicable for single-face balance measurement and correction (by drilling and milling) of disc workpieces (e.g. flywheels, pulleys, brake drums, gears, clutches, flanges, planet carrier, differential housings, brake discs, water pump impellers and tugging wheels.) 2. Equipment Features 2.1 Windows in Simplified Chinese, simple and easy to learn. 2.2 Automatic data saving which can be automatic uploading to the MES system, printing and other functions. MES interface is TCP/IP 2.3 When the balancing software detects that the workpiece needs balance correction, the software indicates the corresponding unbalance value and angle. After balance correction, the qualified unbalance value will automatic replace the unbalance value before balance correction. 2.4 The software has the function of manual interruption of the data record and the function of renewal of the flowing number break. 2.5 Balancing machine software has the function of deleting data records. 2.6 Self-made precision internal rising spindle, with accurate positioning and high repeatability 2.7 Software with storage function. The daily unbalance data can be saved and exported and saved as excel format. 2.8 Equipped with a high power cleaner, automatic start/stop, to collect the iron fillings. 2.9 Compatible with milling, vertical drilling and horizontal drilling modes for balance correction. 2.10 Manipulator interface for pick and place workpieces.